Doing a budget lift or just need a cheap & easy way to
extend your rear bumpstops?
Visit your local scrap metal dealer or dig
through your scrap pile and we'll keep that new lift from flexin' too
high!
Pics are self explanatory. All you need is about 16" of 1" box
tubing and some longer metric bolts for mounting the extenders and OEM
bumpstops. First cut the box steel to match the length of the OEM bumpstop
plates. Then trace where you need to drill the two holes (one elongated).
Install using your longer bolts and washers if needed.
|
|
Revised on:
November 15, 2006
|
Contact Me Here.